After successful calculation, the program tells you the PPM-number (scale error), which will be carried over to the new coordinates. You can set the scale to 1.00, for transfer and rotation only.
The results are saved to the Calculation results file. The calculation parameters are also saved.
Mean error shows the residuals for XY- and Z-coordinates after transformation. The biggest error in XY- and Z-coordinates are shown in the end of the line.
Helmert-factors A and B or affine factors c, d, e, and f. Translation parameters dX, dY and dZ.
Scale factor in transformation and angle between the old and new coordinates.
Shows the calculation result in an ASCII-editor.
Calculated parameters can be edited before using them.
To save the calculation parameters in a HEL-file for later use in Helmert transformation.