The code table is an ASCII format file, where the target’s code is given in the same line in both systems, separated with the space bar. First one is always 3D-Win’s code and the second is other system’s code. Same table can be used in both reading and writing in converter settings.
Some converters (for example Fingis and Zetmap) use different conversion file with three codes in the same line as a control file. In these cases conversion is made between one 3D code and other system’s two codes. These are documented separately in each converter.
You can define a third code in T3-field conversion. This value will be used as default value for surface code (T1-field). Used only if there is no surface code defiend in the data file.
Code containing spaces can be given in either single or double quotes.
Conversion file example:
3002 147 1 3007 146 9 3010 140 3011 141 4001 "12 34" 4002 '123 5'