Fingis vector format

[Not an active format, no further development]

Fingis transfer files.

Writing is always done in north-east -order.
Writing makes arcs as separate lines and converts them to three point format.

Control file

Control file for code conversion.

Common height for lines

Writes common height to the line header. Useful with contour lines.

End mark for each line

Writes the end mark (-1 -1 -1) after each line.

Symbol angle

Horizontal symbol angle to use when writing symbols.

Line point group

Determines how the line point group code is calculated from the line group code

Control file

Defines conversion between two Fingis codes and one 3D-Win code. The first number is 3D-Win code (T3). Second and third numbers are Fingis group and code. Without control file T1 is group and T3 is code.

Example:

1314   1  314     // SYMB.VIIVAN VIITTAUS,KALLIO
1350   1  350     // SYMB.VIIVAN VIITTAUS,ISTUTETTU AITA
1351   1  351     //        "            ,SUOJAKAIDE
1352   1  352     //        "            ,AITA
1353   1  353     //        "            ,TUKIMUURI
1354   1  354     //        "            ,KALLIOLEIKKAUS
1355   1  355     //        "            ,HAVUPUURIVI

Example

          0    6697060    3444120
     9   420     0      72756      90952       7459          0          03204         0
     9   420     0      72847      89549       7537          0          03205         0
     9   234     0      61180      87073      10273          0          03206         0
     1     0     0     142570     262432      18507          0          03135         0
     1     0     0     146275     261459      18370          0          03136         0
     1   123     1     0
     1     0     0      35630      16431       8716
     1     0     0      37182      27189       8227
     1     0     0      38268      44049       7683
     1   121     1     0
     1     0     0      39749      22262       8549
     1     0     0      40635      35809       8035
     1     0     0      42206      52439       7585
    -1    -1    -1
     0     2     0      90522      43549       8540          0          0          0     9Grankulla
     0     3     0     135116     270328      16714          0          0          0    13Mjölnarbacken
    -1    -1    -1

Special settings

There are some special settings related to this converter.

Flag = (default=0)

Binary sum for addtional settings.

512 no offset for texts

Leader = a,b,c (default=empty)

Scalefactors for texts.

a factor for width

b factor for height

c factor for line spacing

LineFormat = 0 tai 1 (default=0)

Recognition of long header for lines.

1 use long header for lines.

TextLineCode = (default=empty)

If you define a code here, a normal breakline will be created for texts having offset dx/dy.